Влияние высокодисперсного порошка смеси Wc и TiC на свойства композиционных материалов

Автор: Чайка Татьяна Валерьевна, Гавриш Владимир Михайлович, Павленко Вячеслав Иванович, Черкащина Наталья Игоревна

Журнал: Нанотехнологии в строительстве: научный интернет-журнал @nanobuild

Рубрика: Применение нанотехнологий и наноматериалов в строительстве

Статья в выпуске: 1 т.15, 2023 года.

Бесплатный доступ

Введение. Исследование направлено на изучение влияния высокодисперсного порошка смеси WC, TiC, полученного в результате рециклинга твердосплавных изделий группы ТК (титановольфрамовые сплавы), на изменение структурных и физико-механических свойств цементных материалов. Материалы и методы исследования. Порошок WC, TiC (размер частиц 20-150 нм, агломератов 300 нм - 1,5 мкм) добавляли в цементный раствор путем частичной замены цемента в различных концентрациях 0%, 1%, 2%, 3%, 4%, 5 % по массе. Основные физико-механические показатели цементной пасты и полученных цементных материалов изучали в соответствии со стандартными методиками, с учетом требований нормативной документации российских и зарубежных стандартов. Также были применены термокинетический, рентгенофазовый анализ, сканирующая электронная микроскопия с интегрированной системой энергодисперсионного анализа. Результаты и обсуждение. Установлено, что добавление высокодисперсного порошка WC, TiC в цементные материалы приводит к увеличению плотности, растекаемости теста, сокращению времени схватывания, снижению водопоглощения, пористости, повышению прочностных характеристик как в ранние, так и в более поздние сроки твердения. Добавление высокодисперсной добавки способствует более ранней гидратации. Структура цементного образца с добавлением порошка более плотная во все рассматриваемые сроки твердения по сравнению с контрольным образцом. Заключение. Полученные результаты исследования представляют важное значение для понимания механизмов действия высокодисперсных частиц WC, TiC на цементные материалы, что в дальнейшем может быть использовано для улучшения свойств композиционных материалов на основе цемента различных областей применений.

Еще

Композиты, добавка, высокодисперсный порошок, модифицирование, карбид вольфрама, карбид титана, прочность

Короткий адрес: https://sciup.org/142237350

IDR: 142237350   |   DOI: 10.15828/2075-8545-2023-15-1-14-26

Список литературы Влияние высокодисперсного порошка смеси Wc и TiC на свойства композиционных материалов

  • Pârvan M.G., Voicu G., Bădănoiu A.I. Study of hydration and hardening processes of self-sensing cement-based materials with carbon black content. J Therm Anal Calorim. 2020; 139: 807–815. https://doi.org/10.1007/s10973-019-08535-8
  • Alnahhal W., Taha R., Al-Nasseri H. et al. Effect of Using Cement Kiln Dust as a Nano-Material on the Strength of Cement Mortars. KSCE J Civ Eng. 2018; 22: 1361–1368. https://doi.org/10.1007/s12205-017-0010-6
  • Сопин М.Д., Лесовик Р.В., Митрохин А.А. Крупнопористый бетон для малоэтажного строительства на композиционных вяжущих // Вестник Белгородского государственного технологического университета им. В.Г. Шухова. 2016. 10. 45-50. https://doi.org/10.12737/22024
  • Askari Dolatabad Y., Kamgar R., Gouhari Nezad I. Rheological and Mechanical Properties, Acid Resistance and Water Penetrability of Lightweight Self-Compacting Concrete Containing Nano-SiO2, Nano-TiO2 and Nano-Al2O3. Iran J Sci Technol Trans Civ Eng. 2020; 44: 603–618. https://doi.org/10.1007/s40996-019-00328-1
  • Yifan Wang, Hongbo Tan, Xianyue Gu, Xingyang He, Junjie Zhang. Preparation of nano-kaolin by wet-grinding process and its application as accelerator in Portland cement. Journal of Building Engineering. 2021; 44: 103401. https://doi.org/10.1016/j.jobe.2021.103401
  • Ariyagounder J., Veerasamy S. Experimental Investigation on the Strength, Durability and Corrosion Properties of Concrete by Partial Replacement of Cement with Nano-SiO2, Nano-CaCO3 and Nano-Ca(OH)2. Iran J Sci Technol Trans Civ Eng. 2022; 46: 201-222. https://doi.org/10.1007/s40996-021-00584-0
  • Monteiro H., Moura B., Soares N. Advancements in nano-enabled cement and concrete: Innovative properties and environmental implications. Journal of Building Engineering. 2022; 56: 104736. https://doi.org/10.1016/j.jobe.2022.104736
  • Snehal K., Das B.B., Sudhi A. et al. Pozzolanic Reactivity, Hydration and Microstructure Characteristics of Blended Cementitious Composites Comprising of Ultrafine Particles. Iran J Sci Technol Trans Civ Eng. 2022. https://doi.org/10.1007/s40996-022-00859-0
  • Faez A., Sayari A., Manie S. Mechanical and Rheological Properties of Self-Compacting Concrete Containing Al2O3 Nanoparticles and Silica Fume. Iran J Sci Technol Trans Civ Eng. 2020; 44: 217–227. https://doi.org/10.1007/s40996-019-00339-y
  • Mahmood R.A., Kockal N.U. Nanoparticles used as an ingredient in different types of concrete. SN Appl. Sci. 2021; 3(5): 1-17. https://doi.org/10.1007/s42452-021-04461-3
  • Shirzadi Javid A.A., Ghoddousi P., Zareechian M. et al. Effects of Spraying Various Nanoparticles at Early Ages on Improving Surface Characteristics of Concrete Pavements. Int J Civ Eng. 2019; 17: 1455–1468. https://doi.org/10.1007/s40999-019-00407-4
  • Bharath Melugiri-Shankaramurthy, Sargam Y. et al. Evaluation of cement paste containing recycled stainless steel powder for sustainable additive manufacturing Construction and Building Materials. 2019; 227: 116696. https://doi.org/10.1016/j.conbuildmat.2019.116696
  • Bharath Melugiri-Shankaramurthy, Sargam Y. et al. Evaluation of cement paste containing recycled stainless steel powder for sustainable additive manufacturing. Construction and Building Materials. 2019; 227: 116696. https://doi.org/10.1016/j.conbuildmat.2019.116696
  • Potapov V., Efimenko Yu., Fediuk R., Gorev D. Effect of hydrothermal nanosilica on the performances of cement concrete. Construction and Building Materials. 2021; 269 (10): 121307. https://doi.org/10.1016/j.conbuildmat.2020.121307
  • Chernishov E.M., Artamonova O.V., Slavcheva G.S. Nanomodification of cement-based composites in the technological life cycle. Nanotechnologies in construction. 2020; 2(3): 130–139. https://doi.org/10.15828/2075-8545-2020-12-3-130-139
  • Nayak C.B., Taware P.P., Jagadale U.T. et al. Effect of SiO2 and ZnO Nano-Composites on Mechanical and Chemical Properties of Modified Concrete. Iran J Sci Technol Trans Civ Eng. 2022; 46: 1237–1247. https://doi.org/10.1007/s40996-021-00694-9
  • 17 Gayathiri K., Praveenkumar S. Influence of Nano Silica on Fresh and Hardened Properties of Cement-based Materials – A Review. Silicon. 2022; 14: 8327-8357. https://doi.org/10.1007/s12633-021-01598-z
  • Szymanowski J, Sadowski L. The Development of Nanoalumina-Based Cement Mortars for Overlay Applications in Concrete Floors. Materials. 2019; 12 (21): 3465. https://doi.org/10.3390/ma12213465
  • Yaoyu Wang, Jiye Li, Lihan Jiang, Lihua Zhao Enhanced. Mechanical and Microstructural Properties of Portland Cement Composites Modified with Submicron Metakaolin. Advances in Civil Engineering. 2020; 2020: 1-13. https://doi.org/10.1155/2020/8882385
  • 20 Mohan K., Pankaj M., Trivedi M.K. Strength of Cement Mortar Using Nano Oxides: An Experimental Study. International Journal of Engineering and Advanced Technology. 2019; 8 (3): 294-299.
  • Liu Changjiang, He Xin, Deng Xiaowei, Zheng Zhoulian et al. Application of nanomaterials in ultra-high performanceconcrete: A review. Nanotechnology Reviews. 2020; 9(1): 1427-1444. https://doi.org/10.1515/ntrev-2020-0107
  • Pietrzak A., Adamus J., Langier B. Application of Titanium Dioxide in Cement and Concrete Technology. Key Engineering Materials. 2016; 687: 243-249. https://doi.org/10.4028/www.scientific.net/КЕМ.687.243
  • Szymanowski J., Sadowski L. The influence of the addition of tetragonal crystalline titanium oxide nanoparticles on the adhesive and functional properties of layered cementitious composites. Composite Structures. 2019; 233: 111636. https://doi.org/10.1016/j.compstruct.2019.111636
  • Krushel’nickaya E. Evaluation of the photocatalytic activity of concrete. Bulletin of Belgorod State Technological University named after. V. G. Shukhov. 2021; 6: 13-20. https://doi.org/10.34031/2071-7318-2021-6-4-13-20
  • Dong Lu, Xianming Shi, Jing Zhong. Understanding the role of unzipped carbon nanotubes in cement pastes, Cement and Concrete Composites. 2022; 126: 104366. https://doi.org/10.1016/j.cemconcomp.2021.104366
  • Muhammad Azeem, Muhammad Azhar Saleem. Role of electrostatic potential energy in carbon nanotube augmented cement paste matrix. Construction and Building Materials. 2020; 239: 117875. https://doi.org/10.1016/j.conbuildmat.2019.117875
  • Chernishov E, Artamonova O.V., Slavcheva G. Nano-Modification of Building Composite Structures. Strength of Materials. 2020. https://doi.org/10.5772/intechopen.86388
  • Kumar Ajay, Namboodiri Vishnu, Joshi Gaurang, Mehta Kush. Fabrication and applications of fullerene-based metal nanocomposites: A review. Journal of Materials Research. 2021; 36: 114–128. https://doi.org/10.1557/s43578-020-00094-1
  • Jan A., Pu Z., Khan K.A. et al. A Review on the Effect of Silica to Alumina Ratio, Alkaline Solution to Binder Ratio, Calcium Oxide + Ferric Oxide, Molar Concentration of Sodium Hydroxide and Sodium Silicate to Sodium Hydroxide Ratio on the Compressive Strength of Geopolymer Concrete. Silicon. 2022; 14: 3147–3162. https://doi.org/10.1007/s12633-021-01130-3
  • Stefanidou Maria, Tsardaka Eirini-Chrysanthi, Karozou Aspasia. Nanoparticles controlling self-healing properties in cement pastes. Materials Today: Proceedings. 2021. https://doi.org/10.1016/j.matpr.2021.07.028
  • Nikbin Iman, Shad Mojtaba, Jafarzadeh Gholam, Dezhampanah Soudabeh. An experimental investigation on combined effects of nano-WO3 and nano-Bi2O3 on the radiation shielding properties of magnetite concretes. Progressin-NuclearEnergy, 2019, 117, 103103. https://doi.org/10.1016/j.pnucene.2019.103103
  • Kong D., He G., Pan H., Weng Y.., Du N., Sheng J. Influences and Mechanisms of Nano-C-S-H Gel Addition on Fresh Properties of the Cement-Based Materials with Sucrose as Retarder. Materials. 2020; 13(10): 2345. https://doi.org/10.3390/ma13102345
  • Long Z., Chen Y., Yin W., Wu X., Wang Y. The Effects of Graphene Oxide-Silica Nano-Hybrid Materials on the Rheological Properties, Mechanical Properties, and Microstructure of Cement-Based Materials. Materials. 2022; 15: 4207. https://doi.org/10.3390/ma15124207
  • Tkach E., Semenov V., Shumilina Yu. Optimization of the composition and technological processes of dispersed cement systems with high performance properties. IOP Conference Series: Materials Science and Engineering. 2021; 1030: 012024. https://doi.org/10.1088/1757-899X/1030/1/012024
  • Li H., Zuo J., Dong B. et al. Effect of Lamellar Inorganic Fillers on the Properties of Epoxy Emulsion Cement Mortar. Int J Concr Struct Mater. 2020; 14. https://doi.org/10.1186/s40069-020-0395-3
  • Danna Wang, Wei Zhang, Yanfeng Ruan, Xun Yu, Baoguo Han,Enhancements and mechanisms of nanoparticles on wear resistance and chloride penetration resistance of reactive powder concrete. Construction and Building Materials. 2018; 189: 487-497. https://doi.org/10.1016/j.conbuildmat.2018.09.041
  • Ariyagounder J., Veerasamy S. Experimental Investigation on the Strength, Durability and Corrosion Properties of Concrete by Partial Replacement of Cement with Nano-SiO3, Nano-CaCO2. Iran J Sci Technol Trans Civ Eng. 2022; 46: 201-222. https://doi.org/10.1007/s40996-021-00584-0
  • Orakzai Muhammad. Hybrid Effect of Nano-Alumina and Nano-Titanium Dioxide on Mechanical Properties of Concrete. Case Studies in Construction Materials. 2021; 14(4): e00483. https://doi.org/10.1016/j.cscm.2020.e00483
  • Singh G., Saini B. Nanomaterial in cement industry: a brief review. Innov. Infrastruct. Solut. 2022; 7: 45. https://doi.org/10.1007/s41062-021-00649-z
  • Lim N.H.A.S., Mohammadhosseini H., Tahir M.M. et al. Microstructure and Strength Properties of Mortar Containing Waste Ceramic Nanoparticles. Arab J Sci Eng. 2018; 43: 5305-5313. https://doi.org/10.1007/s13369-018-3154-x
  • Praveenkumar T.R., Manigandan S., Gemede H.F. et al. Effective utilization of waste textile sludge composite with Al2O3 nanoparticles as a value-added application. Appl Nanosci. 2021. https://doi.org/10.1007/s13204-021-02001-4.
  • Winder Raj, Chaturvedi Vaibhav, Kumar Ankit, Patel Mahesh. Utilization of Industrial Waste in Concrete Mixes – A Review. 3rd International Conference on Innovative Technologies for Clean and Sustainable Development. 2020; 29. https://doi.org/10.1007/978-3-030-51485-3_7
  • Huseien Ghasan, Faridmehr Iman, Nehdi Moncef et al. Structure, morphology and compressive strength of Alkaliactivated mortars containing waste bottle glass nanoparticles. Construction and Building Materials. 2022; 342: 128005. https://doi.org/10.1016/j.conbuildmat.2022.128005
  • Akram M. Mhaya, Shahrizan Baharom, Ghasan Fahim Huseien. Improved strength performance of rubberized Concrete: Role of ground blast furnace slag and waste glass bottle nanoparticles amalgamation. Construction and Building Materials. 2022; 342: 128073. https://doi.org/10.1016/j.conbuildmat.2022.128073
  • Naglaa G. Fahmy, Reham M. Hussien, L.M. Abd el-Hafez et al. Comparative study on fresh, mechanical, microstructures properties and corrosion resistance of self compacted concrete incorporating nanoparticles extracted from industrial wastes under various curing conditions. Journal of Building Engineering. 2022; 57: 104874. https://doi.org/10.1016/j.jobe.2022.104874
  • Tyukavkina V.V., Shchelokova E.A., Tsyryatyeva A.V., Kasikov A.G. TiO2–SiO2 nanocomposites from technological wastes for self-cleaning cement composition. Journal of Building Engineering. 2021; 44: 102648. https://doi.org/10.1016/j.jobe.2021.102648
  • Meddah M.S., Praveenkumar T.R., Vijayalakshmi M.M., Manigandan S., Arunachalam R. Mechanical and microstructural characterization of rice husk ash and Al2O3 nanoparticles modified cement concrete. Construction and Building Materials. 2020; 255: 119358. https://doi.org/10.1016/j.conbuildmat.2020.119358
  • Praveenkumar T.R., Vijayalakshmi M.M., Meddah M.S. Strengths and durability performances of blended cement concrete with TiO2 nanoparticles and rice husk ash. Construction and Building Materials. 2019; 217: 343-351. https://doi.org/10.1016/j.conbuildmat.2019.05.045
  • Rao M.S.C., Vijayalakshmi M.M., Praveenkumar T.R. Behaviour of green concrete (blended concrete) using agroindustrial waste as partial replacement of cement along with nanoparticles. Appl Nanosci. 2021. https://doi.org/10.1007/s13204-021-01917-1
  • Galuga A., Baranov G., Gavrish V., Smirnov S., Losenkov A., Vostrognutov S. Patent ЕР 3 138 932 А1, 08.30.2017.
  • Chayka T., Gavrish V., Baranov G., Oleynik A., Shagova Y. Investigation of the influence of tungsten carbide nanopowder WC and the mixture of tungsten carbides and titanium carbides (WC, TiC) on the change of concrete performance properties. Journal of Physics: Conference Series. 2021; 1866 (1): 012008. https://doi.org/10.1088/1742-6596/1866/1/012008
  • Gavrish V., Chayka T., Oleynik A., Derbasova N. Influence of Tungsten Nanopowders on the Kinetics of Cement Stone Strength Gain. Key Engineering Materials. 2022; 910 KEM: 697-702. https://doi.org/10.4028/p-1682bh
  • Копаница Н.О., Демьяненко О.В., Куликова А.А., Самченко С.В., Козлова И.В., Лукьянова Н.А. Влияние способов активации на структурно-технологические характеристики наномодифицированных цементных композиций. Нанотехнологии в строительстве. 2022. Т. 14, № 6. 481-492. https://doi.org/10.15828/2075-8545-2022-14-6-481-492
  • Choi M., Park K., Oh T. Viscoelastic Properties of Fresh Cement Paste to Study the Flow Behavior. Int J Concr Struct Mater. 2016; 10 (3): 65–74. https://doi.org/10.1007/s40069-016-0158-3
  • Chernishov E.M., Artamonova O.V., Slavcheva G.S. Nanomodification of cement-based composites in the technological life cycle. Nanotechnologies in construction. 2020; 12 (3): 130–139. https://doi.org/10.15828/2075-8545-2020-12-3-130-139
Еще
Статья научная