Статьи журнала - Журнал Сибирского федерального университета. Серия: Техника и технологии
Все статьи: 1367
Satellite monitoring of grain crops in the south part of Western Siberia
Статья научная
In agriculture an important issue is to obtain reliable information on the status of agricultural land. The article presents the most recent results of grain crops’ status monitoring based on remote sensing data on the example of the south part of Western Siberia.
Бесплатно
Satellite monitoring system for the Krasnoyarsk territory area based on small satellites use
Статья научная
The satellite monitoring system for the Krasnoyarsk Territory area is proposed. The main feature of proposed system is its implementation at three levels: space, low altitude and ground levels. Each level assumes the use of data compatible spectrophotometric equipment for subsequent integrated interpretation. The development of ground system for control, data acquisition, processing and distribution is assumed.
Бесплатно
Search for the new form of raw material for the alyumineevoy industry of siberiaode
Статья научная
This article presents the results of research into rational schemes ore enrichment Bazybajsk deposit (Krasnoyarsk region). Optimal conditions for sillimanit and quartz concentrates.
Бесплатно
Статья научная
The actual problem of duly revealing of mechanical stressed sections of fiber optical communication lines, in particular, optical fibers which are under influence of the raised mechanical pressure (strain) in optical cables is considered in this paper. Results of modeling of Brillouin backscattering spectrum changes depending on change of optical fiber strain are presented. Results of experimental examinations of strain characteristics of various types optical fibers, which are under longitudinal and transverse mechanical influences, based on Brillouin backscattering spectrum analysis are given in this paper. Also are discussed temperature dependences of Brillouin backscattering spectrum changes of the optical fibers. The received results confirmed a possibility to detect problem (mechanical stressed) sections and estimations of the optical fiber strain degree on basis of Brillouin refl ectometry method at different mechanical infl uences.
Бесплатно
Shok-free dismounting of cathode assembly lining of aluminum cells
Статья научная
The technology of dismantle of the cathodic device of electrolytic furnaces is considered. Lining destruction in the cathodic device of an electrolytic furnace is made by a special hydraulic press. In a lining material locally non-uniform loadings causing occurrence of cracks are created. The technology allows to exclude with great dispatch-vibrating influence on near electrolytic furnaces and to increase term of their operation.
Бесплатно
Short distance data transmission method by using QR code
Статья научная
QR code (quick response code) has become a widely common technology along with the increase in the usage of smartphone. In many areas, QR codes have over taken the place of linear barcodes due to the obvious advantages of large data capacity and ease of data retrieval. In this paper, we propose a novel data transfer scheme that employs the camera in smartphone devices as an alternative data channel. The sender device encodes data as a series of QR code images like the video data type. The video will be exhibited on the screen of smartphones, tablets, or PCs. The receiver device records the video by camera, splits video into frames, and decodes the data from images. This method is implemented by using multiple versions of QR code started from 1 to 40. By conducting several experiments, the version 19 is the best choice for transferring data between smartphone devices because of it’s the ability to transfer 135 Kbit/s without error. To transmit data from tablets and PCs to smartphone devices, the best version of QR code is 29, which allows 277 Kbit/s to be transferred without error. Further, the proposed method shows the advantages of permitting satellite TV channels to transfer files to viewers instead of giving file links. This results in solving the problem of transferring files from IOS and Mac devices to windows and android devices and vice versa.
Бесплатно
Siberian centre of Russian satellite designing
Статья научная
Space technologies are not luxury, but essential requirement for economic and social development of the country and guarantor of national security. In the Krasnoyarsk region, along with major extractive industries successfully operates a high-tech enterprise in space design Joint - Stock Company Academician M.F. Reshetnev developing space technologies and ensuring economic growth of Russia.
Бесплатно
Sigmaflow как инструмент исследования ветрового комфорта в условиях городской среды
Статья научная
Интенсивный рост современных городов приводит к строительству жилых микрорайонов с плотным расположением зданий различной высотности. Подобные архитектурные решения способствуют непредсказуемому изменению аэрационного режима территории, который может вызывать ухудшение экологической обстановки города, а также формирование дискомфортных условий в зоне пребывания человека. Для изучения механизмов формирования данных условий и прогнозирования ветрового режима используется микромасштабная модель атмосферы города, реализованная в программе «SigmaFlow». В работе представлены результаты верификации численной модели с экспериментальными данными на двух тестовых задачах обтекания модельных элементов городской застройки. Полученные результаты расчетов демонстрируют достаточно хорошее совпадение с экспериментальными данными. Кроме этого, был выполнен анализ формирования ветровых условий в реальном жилом микрорайоне. Получены характерные структуры течения при обтекании зданий, а также выявлены места формирования дискомфортных и опасных зон для пребывания человека.
Бесплатно
Simulation and calculation of heat transfer in multilayer wall structures based on iterative models
Статья научная
Through heat transfer is considered: heat carrier, liquid medium 1 - wall of arbitrary n layers - liquid external medium 2, cooler. For heat flows, a system of (n + 1) nonlinear equations is considered. The method of excluding unknowns sequentially calculates all values of tw, i. The design scheme allows iterative calculations of wall temperature from one to three layers and, accordingly, five heat flows. The novelty of the solution is that the temperature of the first wall tw,1 and the last wall tw, n+1 are not set, but are unknown. They are calculated using an iterative scheme.If you further increase the number of wall layers, the calculations become cumbersome. We are talking about the explicit expression of all tw, i through formulas based on the manual transformation of equations. Optimally bringing the problem to a closed and defined system (n + 1) of equations for (n + 1) unknown wall temperatures tw, i. This system of equations is easily calculated in mass accessible packets, to which Matlab belongs. The advantage is a matrix solution of the entire system at once. In the case of a system of cylindrical and spherical walls, the problem is also solvable. New coefficients have been established for these systems of equations. Which allows you to save balance equations for heat flows.
Бесплатно
Simulation modeling accounting for reservoir fluid properties heterogeneity
Статья научная
Current article deals with fluid properties heterogeneity. The reasons of this phenomenon are analyzed. 3D digital modeling of formation, saturated with oil having variable properties (density and viscosity) is performed. It is compared with model, built in the frameworks of classic approach, where oil has constant density and viscosity. It is shown, that accounting for oil properties heterogeneity allows making oil field design and planning of different activities more precisely.
Бесплатно
Simulation of a continuous ingots structure formation process
Статья научная
The presented results demonstrate the possibility of mathematical complex model in research of the temperature characteristics pattern changes in polymorphic transformations, isotherms of liquidus and solidus, and other parameters depending on the cooling conditions of the ingot. Shown the possibility of predicting parameters of a continuous ingot microstructure (distance between dendrites, size of the austenite and ferrite grains). Were made microstructure parameter calculations of the continuous steel ignot containing 0.17 % C, 0.62 % Si, 1.4 % Mn at various secondary cooling modes.
Бесплатно
Статья научная
Under study was the reaction of the basic operating performance of the cold low-shrinkage ramming paste (CRP) on the pre-heating conditions of the rammed joint. It was found out that the uncontrolled high-rate heat-up of the cold ramming paste (CRP) loosens the macrostructure and intensifies impregnation of the rammed layer. The controlled delayed rate in the temperature rise of the inter-block joint up to 400 °С enables to obtain a high-quality layer of paste with the improved barrier properties against its impregnation with electrolyte.
Бесплатно
Simulation of three phase induction machine
Статья научная
Three phase induction motor is the most popular type AC motor. it is very commonly used for industrial drives. It is cheap, robust, efficient and reliable. It has good speed regulation and high starting torque. It requires little maintenance. It has a reasonable over load capacity. This paper deals with the simulation of three phase induction machine using MATLAB Simulink. The results are obtained for generating mode and motoring mode.
Бесплатно
Simulation of wind speed in the problems of wind power
Статья научная
The article is devoted to research of mathematical models of wind speed and development a way to improve the efficiency of wind power plants based on fuzzy logic using fuzzy model of the wind speed. Simulation of the wind speed is a fairly difficult task, since this source of energy is constantly changing in time and space. Four basic models of wind speed were identified at the end of research work: determinate, probability, spectral and fuzzy. Every one finds their own field of application. Thus, from the energy point of view, the model probabilistic distribution of Weibull is most applicable at the level of technical and economic development. Deterministic model allows to determine the power generated by wind turbines at a given average wind speed. The spectral model should apply in those studies where necessary to account for gusts of wind and sudden changes. Fuzzy model of the wind is the most convenient and relevant for modeling of wind turbine control, it is allows to form a flexible control system.
Бесплатно
Smart materials in materials science
Статья научная
The basic categories of materials which form the row in order of complication of their performance such as simple–multifunctional–adaptive–active–smart are considered. Energy aspects of external effects upon materials, and behavior of materials response to the stimuli of physical, chemical and biological nature, are examined. A model of smart material is proposed as the atom-molecular structure provided with a feedback system which corrects the primary reaction of material upon effect of surroundings via optimal usage of its energy.
Бесплатно
Статья научная
The article presents the results of software development for predictive maps modeling of the earth’s surface processes based on time-varying satellite data using the probabilistic and spatial characteristics of various types of the earth’s surface in the image. The analysis of existing methods for the assessment and modeling of the state of landscapes of various territories using satellite Earth monitoring data is presented. The review of existing systems of the earth’s surface dynamics analysis and their main advantages and disadvantages is given. The cellular automata method was used to implement the forecast. This method allows complex systems modeling using a simple set of rules and is the most convenient and accurate method for working with a space images. Algorithms and basic modeling parameters for using this method are described. The developed software makes it possible to forecast the state of the surface of the territories under consideration based on a series of time-varying data, and also to specify various modeling parameters in order to improve the accuracy of forecast maps. The results of the developed software testing with MODIS and Landsat data are presented, the accuracy of the forecast and the influence of simulation parameters on the result were estimated.
Бесплатно
Solution of the problem of flow past a wing profile near the interface
Статья научная
In this paper presente some approaches to solving the problems of flow past a wing profile near the interface. Studies on the flow in the vicinity of separation boundaries (solid walls and free surfaces) show that in a confined flow liquid turns into a bubble mixture of liquid and gas. This complicates the flow analysis and introduces additional losses resulting in impaired energy performance of the concerned mechanisms. In a general case the problem of a two-phase compressible flow around various types of vane mechanisms is substantially nonlinear (even under no-vortex flow assumption).
Бесплатно
Sorption cleaning of galvanic wastewater from Fe ions (II), (III) and reuse of sorbent IPI-T
Статья научная
The sorption method of wastewater cleaning from ions of Fe (II) and (III) using carbon sorbent IPI-T synthesized in the Irkutsk State Technical University. Particular attention is paid to the regeneration of the carbon sorbent saturated with ions of Fe (II) and (III),by the chemical treatment method. Was studied the reuse of the sorbent for the purification of galvanic wastewater.
Бесплатно
Статья научная
The purpose of this work is to assess the long-term changes in the state of forest vegetation on the territory of the Nature Reserve “Stolby” for the period 2000-2018. An algorithm has been developed for this and a map of the spatial distribution of the average annual NDVI trends of forest vegetation according to MODIS satellite data has been created (May - September as averaging period). In the work, a map of vegetation cover was used according to the electronic ecological atlas of the Nature Reserve “Stolby”. The analysis of the distribution of the number of pixels on the values of the average annual NDVI trend revealed that for the class of coniferous vegetation negative values of the linear trend prevail (by 30%). For the deciduous vegetation class, the number of pixels with negative values of linear trend slope is 3.1% higher than with positive ones. In general, for most types of forest vegetation negative trends NDVI prevail. The negative NDVI trend slope of vegetation indicates degradation processes. The reasons for this are the changes of climatic factors, anthropogenic impact, fires, aging and forest vegetation diseases.
Бесплатно
Статья научная
The objective of the study is to assess the state of agricultural seeds (level of weediness) on the territory of the Krasnoyarsk Agricultural Research Institute of Federal Research Center «Krasnoyarsk Science Center of the SB RAS» near the village Minino according to satellite data. For this purpose, an algorithm for obtaining and processing PlaneScope satellite data for calculating the NDVI vegetation index of agricultural seeds has been developed. On its basis a map of the spatial distribution of NDVI wheat seeds with different levels of weediness has been created. According to PlanetScope satellite data, an opportunity to interpret areas of wheat seeds with high and low levels of weediness has been shown. It has been found that the NDVI value of pure plantation of wheat with a low level of weediness is greater than the NDVI value of wheat seeds with a high level of weediness.
Бесплатно
