Исследование структуры и свойств биоразлагаемых композиций из этил-целлюлозы и хитозана

Автор: Роговина Светлана Захаровна, Алексанян Кристине Владимировна, Грачев Андрей Владимирович, Горенберг Аркадий Яковлевич, Берлин Александр Александрович, Прут Эдуард Вениаминович

Журнал: НБИ технологии @nbi-technologies

Рубрика: Технико-технологические инновации

Статья в выпуске: 6 (15), 2014 года.

Бесплатный доступ

Композиции полилактида с полисахаридами этил целлюлозы и хитозана были получены при различных исходных соотношениях компонентов в условиях деформации сдвига в смесителе «Брабендер». Показано, что композиции имеют хорошую способность к биологическому разложению.

Хитозан, сдвиговые деформации, способность к биологическому разложению, полилактид, низкомолекулярный полиэтиленгликоль

Короткий адрес: https://sciup.org/14968373

IDR: 14968373   |   DOI: 10.15688/jvolsu10.2014.6.7

Список литературы Исследование структуры и свойств биоразлагаемых композиций из этил-целлюлозы и хитозана

  • Anderson K.S., Lim S.H., Hillmyer M.A. Toughening of Polylactide by Melt Blending With Linear Low-Density Polyethylene. J. Appl. Polym. Sci., 2003, vol. 89, no. 14, p. 3757.
  • Arvanitoyannis I.S. Totally and Partially Biodegradable Polymer Blends Based on Natural and Synthetic Macromolecules: Preparation, Physical Properties, and Potential as Food Packaging Materials..J. Macromol. Sci., Part C: Polym. Rev., 1999, vol. 39, no. 2, p. 205.
  • Baiardo M., Frisoni G., Scandola M., Rimelen M., Lips D., Ruffieux K., Wintermantel E. Thermal and Mechanical Properties of Plasticized Poly(L-Lactic Acid). J. Appl. Polym. Sci., 2003, vol. 90, no. 7, p. 1731.
  • Bartczak Z., Galeski A., Kowalczuk M., Sobota M., Malinowski R. Tough Blends of Poly(lactide) and Amorphous Poly(-3-Hydroxy Butyrate) -Morphology and Properties. Eur. Polym. J., 2013, vol. 49, no. 11, p. 3630.
  • Bitinis N., Verdejo R., Cassagnau P., Lopez-Manchado M.A. Structure and Properties of Polylactide/Natural Rubber Blends. Mater. Chem. Phys., 2011, vol. 129, no. 3, p. 823.
  • Bonilla J., Fortunati E., Vargas M., Chiralt A., Kenny J.M. Effects of Chitosan on the Physicochemical and Antimicrobial Properties of PLA. J. Food Eng., 2013, vol. 119, no. 2, p. 236.
  • Chieng B.W., Ibrahim N.A., Yunus W.M.Z.W., Hussein M.Z. Plasticized Poly(Lactic Acid) With Low Molecular Weight Poly(Ethylene Glycol): Mechanical, Thermal, and Morphology Properties. J. Appl. Polym. Sci., 2013, vol. 130, no. 6, p. 4576.
  • Cuenoud M., Bourban P.-E., Plummer C.J.G., Manson J.-A.E. Plasticization of Poly-L-Lactide for Tissue Engineering. J. Appl. Polym. Sci., 2011, vol. 121, no. 4, p. 2078.
  • Feng F., Ye L. Morphologies and Mechanical Properties of Polylactide/Thermoplastic Polyurethane Elastomer Blends. J. Appl. Polym. Sci., 2011, vol. 119, no. 5, p. 2778.
  • Feng Y., Hu Y., Yin J., Zhao G., Jiang W. High-Impact Poly(Lactic Acid)/Poly(Ethylene Octene) Blends Prepared by Reactive Blending. Polym. Eng. Sci., 2013, vol. 53, no. 2, p. 389.
  • Gumus S., Ozkoc G., Aytac A. Plasticized and Unplasticized PLA/Organoclay Nanocomposites: Short-and Long-Term Thermal Properties, Morphology, and Non-Isothermal Crystallization Behavior. J. Appl. Polym. Sci., 2012, vol. 123, no. 5, p. 2837.
  • Gupta A.P., Kumar V. New Emerging Trends in Synthetic Biodegradable Polymers -Polylactide: A Critique. Eur. Polym. J., 2007, vol. 43, no. 10, p. 4053.
  • Han L., Han C., Zhang H., Chen S., Dong L. Morphology and Properties of Biodegradable and Biosourced Polylactide Blends With Poly(3-Hydroxybutyrate-co-4-Hydroxybutyrate). Polym. Compos., 2012, vol. 33, no. 6, p. 850.
  • Hu Y., Hu Y.S., Topolkaraev V., Hiltner A., Baer E. Crystallization and Phase Separation in Blends of High Stereoregular Poly(Lactide) With Poly(Ethylene Glycol). Polymer, 2003, vol. 44, no. 19, p. 5681.
  • Jiang L., Wolcott M.P., Zhang J. Study of Biodegradable Polylactide/Poly (Butylene Adipate-Co-Terephthalate) Blends. Biomacromolecules, 2006, vol. 7, no. 1, p. 199.
  • Jozziasse C.A.P., Topp M.D.C., Veenstra H., Grijpma D.W., Pennings A.J. Supertough Poly(Lactide)s. Polym. Bull., 1994, vol. 33, no. 5, p. 599.
  • Li L., Ding S., Zhou C. Preparation and Degradation of PLA/Chitosan Composite Materials. J. Appl. Polym. Sci., 2004, vol. 91, no. 1, p. 274.
  • Lopez-Rodriguez N., Lopez-Arraiza A., Meaurio E., Sarasua J.R. Crystallization, Morphology, and Mechanical Behavior of Polylactide/Poly(е-Caprolactone) Blends. Polym. Eng. Sci., 2006, vol. 46, no. 9, p. 1299.
  • Ma X., Yu J., Wang N. Compatibility Characterization of Poly(Lactic Acid)/Poly(Propylene Carbonate) Blends. J. Polym. Sci., Part B: Polym. Phys., 2006, vol. 44, no. 1, p. 94.
  • Na Y.-H., He Y., Shuai X., Kikkawa Y., Doi Y., Inoue Y. Compatibilization Effect of Poly(е-Caprolactone)-b-Poly(Ethylene Glycol) Block Copolymers and Phase Morphology Analysis in Immiscible Poly(Lactide)/Poly(e-Caprolactone) Blends. Biomacromolecules, 2002, vol. 3, no. 6, p. 1179.
  • Nanda R., Sasmal A., Nayak P.L. Preparation and Characterization of Chitosan-Polylactide Composites Blended With Cloisite 30B for Control Release of the Anticancer Drug Paclitaxel. Carbohydr. Polym., 2011, vol. 83, no. 2, p. 988.
  • Nyambo C., Mohanty A.K., Misra M. Polylactide-Based Renewable Green Composites From Agricultural Residues and Their Hybrids. Biomacromolecules, 2010, vol. 11, no. 6, p. 1654.
  • Oyama H.I. Super-Tough Poly(Lactic Acid) Materials: Reactive Blending With Ethylene CoPolymer. Polymer, 2009, vol. 50, no. 3, p. 747.
  • Piorkowska E., Kulinski Z., Galeski A., Masirek R. Plasticization of Semicrystalline Poly(LLactide) With Poly(Propylene Glycol). Polymer, 2006, vol. 47, no. 20, p. 7178.
  • Pluta M. Morphology and Properties of Polylactide Modified by Thermal Treatment, Filling With Layered Silicates And Plasticization. Polymer, 2004, vol. 45, no. 24, p. 8239.
  • Prut E.V., Zelenetskii A.N. Chemical Modification and Blending of Polymers in an Extruder Reactor. Russ. Chem. Rev., 2001, vol. 70, no. 1, p. 65.
  • Rinaudo M. Chitin and Chitosan: Properties and Applications. Prog. Polym. Sci., 2006, vol. 31, no. 7, p. 603.
  • Rinaudo M. Main Properties and Current Application of Some Polysaccharides as Biomaterials. Polym. Int., 2008, vol. 57, no. 3, p. 397.
  • Rogovina S., Aleksanyan K., Prut E., Gorenberg, A. Biodegradable Blends of Cellulose With Synthetic Polymers and Some Other Polysaccharides. Eur. Polym. J., 2013, vol. 49, no. 1, p. 194.
  • Rogovina S.Z., Aleksanyan K.V., Novikov D.D., Prut E.V., Rebrov A.V. Synthesis and Investigation of Polyethylene Blends With Natural Polysaccharides and Their Derivatives. Polym. Sci., Ser. A, 2009, vol. 51, no. 5, p. 554.
  • Rogovina S.Z., Alexanyan Ch.V., Prut E.V. Biodegradable Blends Based on Chitin and Chitosan: Production, Structure, and Properties. J. Appl. Polym. Sci., 2011, vol. 121, no. 3, p. 1850.
  • Rogovina S.Z., Vikhoreva G.A., Akopova T.A., Gorbacheva I.N., Zelenetskii S.N. Reaction of Chitosan With Solid Carbonyl-Containing Compounds Under Shearing Deformation Conditions. Mendeleev Commun., 1998, vol. 8, no. 3, p. 107.
  • Sungsanit K., Kao N., Bhattacharya S.N. Properties of Linear Poly(Lactic Acid)/Polyethylene Glycol Blends. Polym. Eng. Sci., 2012, vol. 52, no. 1, p. 108.
  • Wang X., Zhuang Y., Dong L. Study of Biodegradable Polylactide/Poly(Butylene Carbonate) Blend. J. Appl. Polym. Sci., 2013, vol. 127, no. 1, p. 471.
  • Wu C.-S. Polylactide-Based Renewable Composites From Natural Products Residues by Encapsulated Film Bag: Characterization and Biodegradability. Carbohydr. Polym., 2012, vol. 90, no. 1, p. 583.
  • Wu C.-S., Liao H.-T. A New Biodegradable Blends Prepared From Polylactide And Hyaluronic Acid. Polymer, 2005, vol. 46, no. 23, p. 10017.
  • Xiao Y., Li D., Chen X., Lu J., Fan H., Zhang X. Preparation and Cytocompatibility of Chitosan-Modified Polylactide. J. Appl. Polym. Sci., 2008, vol. 110, no. 1, p. 408.
  • Xie F., Li Q.F., Gu B., Liu K., Shen G.X. In Vitro and in Vivo Evaluation of a Biodegradable Chitosan-Pla Composite Peripheral Nerve Guide Conduit Material. Microsurgery, 2008, vol. 28, no. 6, p. 471.
Еще
Статья научная