Condition load effect factor of profile steel in lightweight steel concrete structures

Автор: Rybakov Vladimir Alexandrovich

Журнал: Строительство уникальных зданий и сооружений @unistroy

Статья в выпуске: 4 (89), 2020 года.

Бесплатный доступ

Lightweight steel concrete structures (LSCS) - an innovative building structure type that can be used both as load-bearing and as enclosing one. They consist of profiled steel - usually galvanized and cold-bent - filled with a monolithic foam concrete with a 400…1200 kg/m3 density, and with fiber cement sheets sheathing. In view of the current Standarts, codes and scientific literature there is no methodology for foam filling when calculating the strength of such structures, the goal is to determine the condition load effect factor of profile steel in LSCS. In this paper, based on experimental data, a comparison of two types of floor slabs is considered: LSCS fabricated of foam concrete with a density of 400 kg/m3 and similar slabs made of profile steel elements, fiber-cement sheets without filling with monolithic foam concrete. Three samples of panels of each type were loaded with uniformly distributed load, which gradually increased from zero to failure values using three jacks, each of which transmitted the load to the slab at two points. It has been experimentally proved that the foam concrete, despite its own extremely low strength class, actually includes in the operation, preventing such effects as stability local loss, crushing and profile steel elements cross-section warping and increases the slabs overall load capacity by 20-25%., which corresponds to a condition load effect factor of at least 1.2…1.25.

Еще

Lightweight steel concrete structures (lscs), slab panels, load-bearing capacity, profile steel condition load effect factor

Короткий адрес: https://readera.org/143172527

IDR: 143172527   |   DOI: 10.18720/CUBS.89.7

Список литературы Condition load effect factor of profile steel in lightweight steel concrete structures

  • Sovetnikov, D.O., Videnkov, N.V., Trubina, D.A. Light gauge steel framing in construction of multistorey buildings. Construction of Unique Buildings and Structures. 2015. 3(30). Pp. 152-165. DOI: 10.18720/CUBS.30.11
  • Orlova, A.V., Zhmarin, E.N., Paramonov, K.O. Power efficiency of houses from light-gauge steel structures. Construction of Unique Buildings and Structures. 2013. 6(11). Pp. 1-13. DOI: 10.18720/CUBS.11.1
  • Rybakov, V.A., Ananeva, I.A., Rodicheva, A.O., Ogidan, O.T. Stress-strain state of composite reinforced concrete slab elements under fire activity. Magazine of Civil Engineering. 2017. 74(6). Pp. 161-174. DOI: 10.18720/MCE.74.13
  • Bushmanova, A. V., Kharchenko, D.K., Semenov, K.S., Barabanshchikov, Y.G., Korovina, V.K., Dernakova, A. V. Thermal cracking resistance in massive steel-reinforced concrete structures. Magazine of Civil Engineering. 2018. 79(3). Pp. 45-53. DOI: 10.18720/MCE.79.5
  • Nedviga, E., Beresneva, N., Gravit, M., Blagodatskaya, A. Fire Resistance of Prefabricated Monolithic Reinforced Concrete Slabs of "Marko" Technology. Advances in Intelligent Systems and Computing. 2018. 692. Pp. 739-749. DOI: 10.1007/978-3-319-70987-1_78
  • Rybakov, V.A., Al Ali, M., Panteleev, A.P., Fedotova, K.A., Smirnov, A. V. Bearing capacity of rafter systems made of steel thin-walled structures in attic roofs. Magazine of Civil Engineering. 2017. 76(8). Pp. 28-39.
  • DOI: 10.18720/MCE.76.3
  • Ariyanayagam, A.D., Mahendran, M. Fire performance of load bearing LSF wall systems made of low strength steel studs. Thin-Walled Structures. 2018. 130. Pp. 487-504.
  • DOI: 10.1016/j.tws.2018.05.018
  • Bronzova, M.K., Vatin, N.I., Garifullin, M.R. Frame buildings construction using monolithic foamed concrete. Construction of Unique Buildings and Structures. 2015. 1(28). Pp. 74-90.
  • Rum, R.H.M., Jaini, Z.M., Abd Ghaffar, N.H., Abd Rahman, N. A Preliminary Experimental Study on Vibration Responses of Foamed Concrete Composite Slabs. IOP Conference Series: Materials Science and Engineering. 2017. 271(1).
  • DOI: 10.1088/1757-899X/271/1/012102
  • Prabha, P., Palani, G.S., Lakshmanan, N., Senthil, R. Flexural Behaviour of Steel-Foam Concrete Composite Light-Weight Panels. KSCE Journal of Civil Engineering. 2018. 22(9). Pp. 3534-3545.
  • DOI: 10.1007/s12205-018-0827-7
  • Jerman, M., Keppert, M., Výborný, J., Černý, R. Hygric, thermal and durability properties of autoclaved aerated concrete. Construction and Building Materials. 2013. 41. Pp. 352-359.
  • DOI: 10.1016/j.conbuildmat.2012.12.036
  • Ahmadi, A., Mathieson, C., Clifton, G.C., Das, R., Lim, J.B.P. An experimental study on a novel cold-formed steel connection for light gauge open channel steel trusses. Journal of Constructional Steel Research. 2016. 122. Pp. 70-79.
  • DOI: 10.1016/j.jcsr.2016.02.007
  • Hulimka, J., Krzywoń, R., Jȩdrzejewska, A. Laboratory Tests of Foam Concrete Slabs Reinforced with Composite Grid. Procedia Engineering. 2017. 193. Pp. 337-344.
  • DOI: 10.1016/j.proeng.2017.06.222
  • Kadela, M., Kozłowski, M. Foamed Concrete Layer as Sub-structure of Industrial Concrete Floor. Procedia Engineering. 2016. 161. Pp. 468-476.
  • DOI: 10.1016/j.proeng.2016.08.663
  • Vlcek, J., Drusa, M., Scherfel, W., Sedlar, B. Experimental Investigation of Properties of Foam Concrete for Industrial Floors in Testing Field. IOP Conference Series: Earth and Environmental Science. 2017. 95(2).
  • DOI: 10.1088/1755-1315/95/2/022049
  • Orlovich, R.B., Bespalov, V. V., Derkach, V.N. Compressed-bent masonry walls reinforced with composite materials. Magazine of Civil Engineering. 2018. 79(3). Pp. 112-119.
  • DOI: 10.18720/MCE.79.12
  • Bespalov, V. V., Ucer, D., Salmanov, I.D., Kurbanov, I.N., Kupavykh, S. V. Deformation compatibility of masonry and composite materials. Magazine of Civil Engineering. 2018. 78(2). Pp. 136- 150.
  • DOI: 10.18720/MCE.78.11
  • Barabanshchikov, Y., Fedorenko, I., Kostyrya, S., Usanova, K. Cold-Bonded Fly Ash Lightweight Aggregate Concretes with Low Thermal Transmittance: Review. Advances in Intelligent Systems and Computing. 2019. 983. Pp. 858-866.
  • DOI: 10.1007/978-3-030-19868-8_84
  • Usanova, K.Y. Properties of Cold-Bonded Fly Ash Lightweight Aggregate Concretes. Lecture Notes in Civil Engineering. 2020. 70. Pp. 507-516.
  • DOI: 10.1007/978-3-030-42351-3_44
  • Krutilin, A.B., Rykhlionak, Y.A., Liashkevich, V. V. Thermophysical characteristics of low density autoclaved aerated concrete and their influence on durability of exterior walls of buildings. Magazine of Civil Engineering. 2015. 54(2). Pp. 46-55.
  • DOI: 10.5862/MCE.54.5
  • Vatin, N.I., Gorshkov, A.S., Kornienko, S.V. The consumer properties of wall products from AAC. Construction of Unique Buildings and Structures. 2016. 1(40). Pp. 78-101.
  • Alyabyeva, D.A. Reinforcing of large gas-concrete panels from an autoclave. Construction of Unique Buildings and Structures. 2015. 8(35). Pp. 24-35.
  • Samarin, O.D. Temperature in linear elements of enclosing structures. Magazine of Civil Engineering. 2017. 70(2). Pp. 3-10.
  • DOI: 10.5862/MCE.70.1
  • Leshchenko, M. V., Semko, V. Thermal characteristics of the external walling made of coldformed steel studs and polystyrene concrete. Magazine of Civil Engineering. 2015. 60(8). Pp. 44-55.
  • DOI: 10.5862/MCE.60.6
  • Trubina, D.A., Kononova, L.A., Kaurov, A.A., Pichugin, E.D., Abdulaev, D.A. Local buckling of steel cold-formed profiles under transverse bending. Construction of Unique Buildings and Structures. 2014. 4(19). Pp. 109-127.
  • Kirsanov, A.I., Stolyarov, O.N. Mechanical properties of synthetic fibers applied to concrete reinforcement. Magazine of Civil Engineering. 2018. 80(4). Pp. 15-23.
  • DOI: 10.18720/MCE.80.2
  • Travush, V.I., Konin, D. V., Krylov, A.S. Strength of reinforced concrete beams of highperformance concrete and fiber reinforced concrete. Magazine of Civil Engineering. 2018. 77(1). Pp. 90- 100.
  • DOI: 10.18720/MCE.77.8
  • Medvedev, V.N., Semeniuk, S.D. Durability and deformability of braced bending elements with external sheet reinforcement. Magazine of Civil Engineering. 2016. 63(3). Pp. 3-15.
  • DOI: 10.5862/MCE.63.1
  • Kanishchev, R.A. Analysis of local stability of the rectangular tubes filled with concrete. Magazine of Civil Engineering. 2016. 64(4). Pp. 59-68.
  • DOI: 10.5862/MCE.64.6
  • Kikot, A.A. Design of cold-formed tension members using the CFSteel software. Magazine of Civil Engineering. 2016. 61(1). Pp. 42-59.
  • DOI: 10.5862/MCE.61.5
  • Vatin, N.I., Nazmeeva, T., Guslinscky, R. Problems of cold-bent notched c-shaped profile members. Advanced Materials Research. 2014. 941-944. Pp. 1871-1875.
  • DOI: 10.4028/www.scientific.net/AMR.941-944.1871
  • Garifullin, M., Pajunen, S., Mela, K., Heinisuo, M., Havula, J. Initial in-plane rotational stiffness of welded RHS T joints with axial force in main member. Journal of Constructional Steel Research. 2017. 139. Pp. 353-362.
  • DOI: 10.1016/j.jcsr.2017.09.033
Еще
Статья научная