Use of carbon sorbents in process of hg-ions removal from treated wastewater

Автор: Farberova E.A., Khodyashev M.B., Filatov V. Yu., Khodyashev N.B., Teengaeva E.A., Nozdrukhin A.D.

Журнал: Вестник Воронежского государственного университета инженерных технологий @vestnik-vsuet

Рубрика: Химическая технология

Статья в выпуске: 4 (78), 2018 года.

Бесплатный доступ

Studies on the analysis of composition of wastewater from chlorine and alkali production process, sampled at the treatment different stages, treated by electrolysis and the mercury cathode use, are presented in this paper. It is demonstrated that Hg-content range in the wastewater entering the post-treatment stage is 14.06-14.15 mg/dm3. Hg-ions sedimentation and filtration allow to reduce such content to 0.005 mg/dm3, while the final post-treatment stage with use of the anionite of АВ-17-8 type allows to achieve Hg-concentration in effluents discharged to water bodies with range of 0.001-0.002 mg/dm3. In addition to mercury, the wastewater contains relatively high concentrations of sodium, potassium, iron, aluminum and calcium ions. The main anion type in waste water is a chlorine anion; its content can be significantly reduced only after the post-treatment with the anionites. Experimental studies were carried out on the use of carbon sorbents in the process of wastewater post-treatment with regard to Hg-ions after the sedimentation and filtration stage...


Treatment of wastewater with hg-content, wastewater composition, carbonic sorbents, modified carbonic sorbent, adsorptive posttreatment

Короткий адрес:

IDR: 140244284   |   DOI: 10.20914/2310-1202-2018-4-322-329

Статья научная