Possibility of using ribs to protect pipelines from the long crack propagation

Possibility of using ribs to protect pipelines from the long crack propagation

Автор: Baraa M.H. albaghdadi, Cherniavsky A.O.

Журнал: Вестник Южно-Уральского государственного университета. Серия: Машиностроение @vestnik-susu-engineering

Рубрика: Расчет и конструирование

Статья в выпуске: 3 т.16, 2016 года.

Бесплатный доступ

This research aims to build a finite element model of oil or gas steel pipelines transmission. The model has been developed in that crack propagation in pipes can be reduced as possible to avoid the failure. The suggestion that is taken into consideration for this purposeis to stopping crack propagation as possibly, is by using ribs as arresters. Different thicknesses have been tested for the ribs used in this study. The first one was of 0.02 m, while as the second thickness was of 0.05 m. The dimensions of pipe are of 0.01 m thickness, and diameter of 0.5 m. The model of pipe consists of three parts. The first part has two different lengths 2 m and 3 m. The second, which is the rib, is of length of 0.15 m. The third part of pipe has the length of 1 m. So all the three parts are made up the case study that was studied in this work. The value of stress intensity factor K1 for different lengths of cracks has been calculated by the finite element model deve-loped by using ANSYS package. These calculations were applied with and without ribs. The results showed that when using the ribs, the stress intensity factor would be reduced significantly. This leads to reduce the possibility of failure.

Еще

Pipe (pipeline), crack, crack arrest, crack propagation, long crack, stress intensity factor, fem

Короткий адрес: https://sciup.org/147151722

IDR: 147151722   |   DOI: 10.14529/engin160302

Список литературы Possibility of using ribs to protect pipelines from the long crack propagation

  • Zhu X.-K. State-of-the-art review of fracture control technology for modern and vintage gas transmission pipelines. Engineering Fracture Mechanics, 2015, vol. 148, pp. 260-280 DOI: 10.1016/j.engfracmech.2015.05.055
  • Yang Y., Shi L., Xu Z., Lu H., Chen X., Wang X. Fracture toughness of the materials in welded joint of X80 pipeline steel. Engineering Fracture Mechanics, 2015, vol. 148, pp. 337-349 DOI: 10.1016/j.engfracmech.2015.07.061
  • Shin S.Y., Hwang B., Lee S., Kima N.J., Ahnc S.S. Correlation of microstructure and charpy impact properties in API X70 and X80 line-pipe steels. Materials Science and Engineering: A, 2007, vol. 458, iss. 1-2, pp. 281-289 DOI: 10.1016/j.msea.2006.12.097
  • Souza R.F., Ruggieri C. Fracture assessments of clad pipe girth welds incorporating improved crack driving force solutions. Engineering Fracture Mechanics, 2015, vol. 148, pp. 383-405 DOI: 10.1016/j.engfracmech.2015.04.029
  • Beden S.M. Environment Effects on Fatigue Crack Growth Rate in API 5L X70 and X80 Steel Pipelines. International Journal of Engineering research and science technology, 2014, vol. 3, no. 2, pp. 333-343.
  • Rivalin F., Besson J., Pineau A., Fant M.D. Ductile tearing of pipeline-steel wide plates II. Modeling of in-plane crack propagation. Engineering Fracture Mechanics, 2001, vol. 68, pp. 347-364 DOI: 10.1016/S0013-7944(00)00108-9
  • Kryzhanivs’kyi E.I., Hrabovs’kyi R.S., Fedorovych I.Ya., Barna R.A. Evaluation of the Kinetics of Fracture of Elements of a Gas Pipeline after Operation. Materials Science, 2015, vol. 51, iss. 1, pp. 7-14 DOI: 10.1007/s11003-015-9804-1
  • Zhuang Z., O’donoghue P.E., The recent development of analysis methodology for rapid crack propagation and arrest in gas pipelines. International Journal of Fracture, 2000, vol. 101, iss. 3, pp. 269-290 DOI: 10.1023/A:1007614308834
  • Ortiz M., Pandolfi A. Finite-Deformation Irreversible Cohesive Elements for Three-Dimensional Crack-Propagation Analysis. International Journal for Numerical Methods in Engineering, 1999, vol. 44, is. 9, pp. 1267-1282. DOI: 10.1002/(SICI)1097-0207(19990330)44:93.0.CO;2-7
  • O’donoghueand P.E., Zhuang Z. A finite element model for crack arrestor design in gas pipelines. Fatigue & Fracture of Engineering Materials & Structures, 1999, vol. 22, iss. 1, pp. 59-66 DOI: 10.1046/j.1460-2695.1999.00139.x
  • Shabalov I.P., Solov’ev D.M., Filippov G.A., Livanova O.V. Mechanical Properties of a Pipe Workpiece at the Stages of JCOE Pipe Forming. Russian Metallurgy (Metally), 2015, vol. 2015, iss. 4, pp. 309-316 DOI: 10.1134/S003602951504014X
  • Makino H., Kubo T., Shiwaku T., Endo S., Inoue T., Kawaguchi Y., Matsumoto Y., Machida S. Prediction for Crack Propagation and Arrest of Shear Fracture in Ultra-high Pressure Natural Gas Pipelines. ISIJ International, 2001, vol. 41, no. 4, pp. 381-388 DOI: 10.2355/isijinternational.41.381
  • Ibrahim R.A. Overview of Structural Life Assessment and Reliability, Part V: Joints and Weldments. Journal of Ship Production and Design, 2016, vol. 32, no. 1, pp. 1-20 DOI: 10.5957/JSPD.32.1.130025-5
  • Mitsuya M., Motohashi H., Oguchi N., Aihara S. Calculation of Dynamic Stress Intensity Factors for Pipes During Crack Propagation by Dynamic Finite Element Analysis. J. Pressure Vessel Technol., 2013, vol. 136, iss. 1 DOI: 10.1115/1.4025617
  • Murtagian G.R., Ernst H.A. Dynamic axial crack propagation in steel line pipes. Part II: Theoretical developments. Engineering Fracture Mechanics, 2005, vol. 72, iss. 16, pp. 2535-2548 DOI: 10.1016/j.engfracmech.2005.03.004
  • Glushkov S.V., Skvortsov Yu.V. Fracture Mechanics Analysis of Cylindrical Panels with Non-Through Cracks. Russian Aeronautics, 2014, vol. 57, iss. 3, pp. 240-244 DOI: 10.3103/S1068799814030040
  • Elboujdaini M., Fang B., Eadie R. Canadian Experience in SCC of Pipelines and Its Remedies. Recent Progress in SCC of Pipelines in Near-Neutral pH Environment. Integrity of Pipelines Transporting Hydrocarbons. Springer Netherlands, 2011, vol. 1, ch. 8, pp. 99-114 DOI: 10.1007/978-94-007-0588-3_8
  • Kucheryavyi V.I., Mil’kov S.N. Statistical Modeling of the Residual Life of an Oil and Gas Pipeline with Axial Crack-Like Defects. Journal of Machinery Manufacture and Reliability, 2014, vol. 43, iss. 1, pp. 82-87 DOI: 10.3103/S1052618814010117
  • Matvienko Yu.G. A Damage Evolution Approach in Fracture Mechanics of Pipelines. Integrity of Pipelines Transporting Hydrocarbons of the NATO Science for Peace and Security Ser. C: Environmental Security, 2011, vol. 1, pp. 227-244 DOI: 10.1007/978-94-007-0588-3_15
  • Huang H.-S. Fracture Characteristics Analysis of Pressured Pipeline with Crack Using Boundary Element Method. Advances in Materials Science and Engineering, 2015, vol. 2015, 13 p DOI: 10.1155/2015/508630
  • Hari Manoj Simha C. A model for arrest of rapid cracks in gas-pressurized ductile steel line pipe. Engineering Fracture Mechanics, 2016, vol. 154, pp. 245-261 DOI: 10.1016/j.engfracmech.2015.12.009
  • Yu M., Chen W., Kania R., Boven G.V., Been J. Crack propagation of pipeline steel exposed to a near-neutral pH environment under variable pressure fluctuations. International Journal of Fatigue, 2016, vol. 82, pp. 658-666 DOI: 10.1016/j.ijfatigue.2015.09.024
Еще
Статья научная
SciUp 2024 © 2024 ©