Energy resource efficient designs of small-sized water circulating cooling devices

Автор: Bondar K.E., Shulaev N.S., Ivanov S.P., Laponov S.V.

Журнал: Nanotechnologies in Construction: A Scientific Internet-Journal @nanobuild-en

Рубрика: Rational use of natural sources

Статья в выпуске: 6 Vol.12, 2020 года.

Бесплатный доступ

To use natural sources in rational way, plantsof continuous cooling of closed systems of recycling water supply are used. The paper presents designs of small-sized devices for recycling water cooling which are energy resource effective due to twisted motion of air flow, moving countercurrent to the cooled water. Heat and mass transfer is a nanotechnological process that occurs at the intermolecular level. Methods and materials. Countercurrent mini cooling towers are widely used in all industries, but there are some disadvantages, the main of which is the insufficient interaction time of the moving phases. Screw motion of air flow is created by the tangential supply of cooling air in the bottom part of cylindrical small-sized cooling tower. The rate of rotary motion decreases as air flow moves up in cooling towers, and vertical parameter of the rate – increases. Such scheme of the air flow motionmakes it possible to decrease average vertical parameter of the rate and to increase phases contact time. Laboratory research. To determine the technological and hydroaerothermal characteristics, as well as to estimate the efficiency of cooling recycled water, and to carry out mass-heat exchange at the intermolecular stagean experimental facility of small-sized cooling tower with twisted air flow has been developed. Conclusions. In accordance with the exponential law it is shown that the rotational component decreases at increasing height, and in accordance with the power law the vertical component increases component with the exponent ~1,79. It is determined that moisture content x and air temperature tv in the volume of the height of the sprinkler varies according to a power law, in particular for a screw cooling tower proportionally x ~ h0,83, tв ~ h1,25. It was determined that the coefficients of mass transfer βxv and heat transfer αv of a mini cooling tower with twisted air flow at the intermolecular level with equal irrigation densities are 20% higher than the coefficients of a mini cooling tower with counter-current flow. Also it has been determined experimentally a dependence of aerodynamics resistance coefficient of the twisted irrigator of the cooling tower on criterium Refor air flow, and it was determined that it decreases like Re–K2 as the exponent K2 varies in the range 0.114÷0.193 depending on the irrigation density.

Еще

Nanotechnologies, recycled water cooling, cooling tower, mini cooling tower, sprinkler, aerodynamics

Короткий адрес: https://sciup.org/142226945

IDR: 142226945   |   DOI: 10.15828/2075-8545-2020-12-6-339-348

Список литературы Energy resource efficient designs of small-sized water circulating cooling devices

  • Ivanov S.P., Ibragimov I.G., Bondar K.E., Ivanov O.S. Improving the efficiency of heat and mass transfer processes in water circulation cycles of industrial enterprises. Chemical and oil and gas engineering. 2014;12: 31. (In Russian).
  • Ivanov S.P., Ibragimov I.G., Bondar K.E., Ivanov O.S. Experimental facility for research of hydroaerothermal characteristics of sprinklers and water catchers of cooling towers.Chemical and oil and gas engineering. 2015;1: 3. (In Russian).
  • Abramov N.N. Water supply: textbook for Universities. 3rd edition. Moscow: Stroizdat; 1982.
  • Goncharov V.V. New technical solutions for tower and fan cooling towers.Chemical engineering. 2006; 6: 15-18.
  • Design features of the Dewdrop cooling tower. Available from: https://tecopro.ru/
  • Solovyov A.A. Improving the efficiency of using low-potential heat in energy production.Modern science and innovation. 2017; 3 (19): 140-146.
  • Fedyaev V.L., Bogatkin V.I., Vlasov E.M. Improvement of evaporative cooling towers for recycling water supply systems for industrial enterprises. Power Engineering of Tatarstan. 2011; 2: 44-47. (In Russian).
  • Pushnov A.S., Sokolov A.S., Butrin M.M. Methods for intensifying the process of heat and mass exchange in column apparatuses with contact devices. Bulletin of the Moscow State Technical University MAMI. 2013; 1 (15): 237-242. (In Russian).
  • Bondar K.E., Ivanov O.S. Improving the design of water catchers for industrial cooling towers to reduce chemical emissions into the atmosphere. In: Geology and oil and gas potential of the West Siberian megabasin (experience, innovations): Proceedings of the Ninth International scientific and technical conference. ed. by O.A. Novoselov. Vol. 2. Tyumen: Tyumen State Petroleum Technological University; 2014. p. 250–252.
  • Bondar K.E., Ivanov O.S. Improving the designs of water traps in order to reduce droplet entrainment from industrial cooling towers. Low-waste, resource-saving chemical technologies and environmental safety: collection of materials of the All-Russian scientific and practical conference with international participation. Sterlitamak: Phobos; 2013. 223.
  • Bondar K.E., Ivanov S.P., Laponov S.V., Ibragimov I.G., Ivanov O.S. Forming extrusion equipment for the production of a mesh shell.In: Modern technologies in the oil and gas industry-2014: Proceedings of the international scientific and technical conference, 2 vols. Vol. 2. Ufa: Arkaim; 2014. p. 65–69.
  • Ivanov S.P., Bondar K.E., Suleymanov D.F., Shulaev N.S., Ibragimov I.G. Cooling tower sprinkler. Utility model patent RF 147330.2014-11-10.
  • Ivanov S.P., Boyev E.V., Storozhenko V.N., Izmailov S.P., Gerasimov V.V., Ryzhakov G.G., Lezhnev M.L. Cooling tower sprinkler. Patent RF 2295685. 2007-03-20.
  • Alexandrov D.V. Applied hydrodynamics. Moscow: Yurayt; 2018.
  • Bondar K.E., Shulaev N.S., Suleimanov D.F., Ivanov S.P., Podtspnyak E.S. Distribution of air flow rates in a small-sized cooling tower with tangential air supply. Natural and technical Sciences. 2019; 11: 411-414.
  • Bondar K.E., Ivanov S.P., Ibragimov I.G. and et al. Small-sized cooling tower. Patent RF 182965. 2018-09-06.
  • Ivanov S.P., BondarК.Е., SuleymanovВ.А. et al. Cooling tower sprinkler. Patent RF147330. 2014-11-10.
  • Ivanov S.P., Ibragimov I.G., Bondar K.E., Ivanov O.S. Experimental facilities for research of hydroaerothermal characteristics of sprinklers and water catcher cooling towers. Chemical and oil and gas engineering. 2015; 1: 3-5.
  • Bondar K.E. Technique carrying out of hydro aero-thermal and aerohydrodynamic tests of sprinkler of tubular mini cooling tower. In: Modern technologies in education and industry: from theory to practice: Collection of materials. Intra-university scientific and practical conference. Ufa: Oil and Gas Business; 2018. p. 158–159.
  • Ivanov S.P., Boev E.V., Nikolaev E.A. Method of hydroaerothermal testing of cooling tower sprinklers.Technique and technology. 2007; 3: 118-119.
  • Kluyko V.V., Kholpanov L.P. Research and calculation of hydrodynamic characteristics of regular contact devices in mass transfer columns. Chemical and oil and gas engineering. 2004; 5: 19-23.
  • Kalatuzov V.A. Improving the available capacity and efficiency of Perm CHPP-14 by reconstructing cooling towers. Refining and petrochemicals. 2004; 8: 17-20.
Еще
Статья научная