Computer modeling of hot isostatic pressing process of porous blank

Бесплатный доступ

Existing mathematical models for the process of HIP porous blanks are based on the solution of approximately differential equations of the equilibrium of quasi-continuous medium. The continual approach is used for computer modeling of the compressible body HIP process. Partial differential equations of motion for a quasi-continuous packing medium and physical equations for a viscous-plastic isotropic porous material subjected to work hardening are taken as the basis for the mathematical model by means of these simultaneous equations. Besides the equations of motion and the rheological equation, the equation of continuity deformation and the equation of heat flow are used. Numerical calculations for additional packing of a high-speed steel powder billet preliminary pressed in the hydrostat are performed. Numerical calculation of the problem for hardening the cylindrical high-speed steel billet with a mild steel shell is done using Lagrange’s method by means of the difference scheme of continuous calculation of the Wilkins’ type. Computer modeling allows to control the process of hardening and changing the form of a porous body during the HIP process.

Еще

Continuum, mathematical model, powder blank, different equation, rheology

Короткий адрес: https://sciup.org/147157033

IDR: 147157033   |   DOI: 10.14529/met160318

Список литературы Computer modeling of hot isostatic pressing process of porous blank

  • Advanced Technology for New Materials HIP, Brochure No. M3C2010. -Kobe Steel Ltd., Japan, 1969. -21 р.
  • Quintus Hot Isostatic Presses. Pamphlet A08 -400 8E. -ABB Asea Brown Boveri, Sweden, 1971. -16 р.
  • Your Partner in High Pressure Technology National Forge. -National Forge, USA, 1972. -32 p.
  • Arzt, E. Practical Applications of Hot-Isostatic Pressing Diagrams: Four Case Studies/E. Arzt, M.F. Ashby//MetallurgicalTransactions A. -1983. -Vol. 14A, no. 1. -P. 211-221 DOI: 10.1007/BF02651618
  • Helle, A.S. Hot-Isostatic Pressing Diagrams: New Developments/A.S. Helle, K.E. Easterling, M.F. Ashby//Acta Metallurgica. -1985. -Vol. 33, no. 12. -P. 2163-2174 DOI: 10.1016/0001-6160(85)90177-4
  • Li, W.-B. On Densification and Shape Change During Hot Isostatic Pressing/W.-B. Li, M.P. Ashby//Acta Metallurgica. -1987. -Vol. 35, no. 12. -Р. 2831-2842 DOI: 10.1016/0001-6160(87)90282-3
  • Лаптев, А.М. Параметры горячего изостатического прессования пористых материалов/А.М. Лаптев, В.Н. Самаров, С.В. Подлесный//Известия АН СССР. Металлы. -1988. -№ 5. -С. 92-99.
  • Duva, J.M. The Densification of Powders by Power-Law Creep During Hot Isostatic Pressing/J.M. Duva, P.D. Crow//Acta Metallurgica et Materialia. -1992. -Vol. 40, no. 1. -P. 31-35 DOI: 10.1016/0956-7151(92)90196-L
  • Numerical Simulation of the Densification Behaviour of Metal Powder During Hot Isostatic Pressing/A. Nohara, T. Nakagawa, T. Soh, T. Shinke//International Journal for Numerical Methods in Engineering. -1988. -No. 25. -P. 213-225 DOI: 10.1002/nme.1620250117
  • Nohara, A. Computer Simulation of Densification Behaviour of Metal Powder During HIP/A. Nohara, T. Nakagawa, T. Soh//Bulletin of the Japan Institute of Metals. -1989. -Vol. 28, no. 11. -P. 922-926 DOI: 10.2320/materia1962.28.922
  • Shima, S. Plasticity Theory for Porous Metals/S. Shima, M. Oyane//International Journal of Mechanical Sciences. -1976. -Vol. 18, no. 6. -P. 285-291 DOI: 10.1016/0020-7403(76)90030-8
  • Abouaf, M. Elasto-Viscous-Plastic Flow of a Porous Body/M. Abouaf//Mémoires et Études Scientifiques de la Revue de Métallurgie. -1986. -Vol. 83, no. 6. -P. 325-328.
  • Nomoto, T. Analytical Studies on Sintering Deformation Behavior During Hot Isostatic Pressing/T. Nomoto, H. Yoshimura//Quarterly Journal of the Japan Welding Society. -1990. -Vol. 8, no. 1. -P. 32-38 DOI: 10.2207/qjjws.8.32
  • Nakagawa, T. Simulation of Cold and Hot Isostatic Pressing/T. Nakagawa, A. Nohara//Kobelko Technology Review. -1991. -No. 12. -P. 10-14 DOI: 10.1016/0026-0657(92)91574-4
  • Скороход, В.В. Теория нелинейно-вязкого и пластического поведения пористых материалов/В.В. Скороход, М.Б. Штерн, И.Ф. Мартынова//Порошковая металлургия. -1987. -№ 8. -С. 23-30.
  • Лаптев, А.М. Расчёт процессов уплотнения пористых материалов на основе теории ползучести/А.М. Лаптев//Технология лёгких сплавов. -1982. -№ 7. -С. 16-20.
  • Фролов, А.А. Система проектирования технологических режимов горячего изостатического прессования порошковых материалов. 1. Постановка задачи. Описание модели верхнего уровня/А.А. Фролов, О.Б. Садыхов, Г.Я. Гун//Порошковая металлургия. -1991. -№ 6. -С. 12-17.
  • Уилкинс, М.Л. Расчёт упруго-пластических течений: пер. с англ./М.Л. Уилкинс//Вычислительные методы в гидродинамике/под ред. Б. Олдера, С. Фернбаха, М. Ротенберга. -М.: Мир, 1967. -С. 212-263.
Еще
Статья научная