Analysis of energy and power parameters on the extruding of copper installation Conform with prechamber

Автор: Gorokhov Yuriy V., Belyaev Sergey V., Gubanov Ivan Yu., Uskov Igor V., Ivanov Alexandr G.

Журнал: Журнал Сибирского федерального университета. Серия: Техника и технологии @technologies-sfu

Статья в выпуске: 4 т.11, 2018 года.

Бесплатный доступ

The object of the calculation served as a real process of continuous extrusion of copper profiles on the installation Conform equipped with a set of pressing tool prechamber at the factory for processing non-ferrous metals in the city of Kamensk-Uralsk. To calculate the length of the split container, which should provide on its moving surface friction force sufficient to extrude the metal from the forehearth in a point matrix, the torque on the drive wheel and the electric motor power, used a methodology based on the determination of the total compression force, which was proposed by I.L. Perlin. These equations are characterized by simplicity and ease of use in technical and technological design of the metal extrusion process method Conform with prechamber.

Еще

Conform machine, pre-chamber, continuous extrusion, energy-power calculation, active friction

Короткий адрес: https://sciup.org/146279377

IDR: 146279377   |   DOI: 10.17516/1999-494X-0071

Статья научная