A Novel DTC-SVM Method For Induction Motor Fed By Matrix Converter

Автор: Cai Bin-jun, Zhu jian-lin

Журнал: International Journal of Intelligent Systems and Applications(IJISA) @ijisa

Статья в выпуске: 1 vol.2, 2010 года.

Бесплатный доступ

This paper presents a novel DTC-SVM method for matrix converter (MC) fed induction motor. The advantages of DTC method are combined with the advantages of the matrix converter based on space vector modulation (SVM) technique. This proposed novel method provides a precious input power factor control capability beside the high control performances. Furthermore, Conventional principles of DTC and SVM of MC were described. The combination of the two was given in detail. The FFT spectrum analysis of the input current shows the better harmonic contents as compared to the conventional DTC method. Finally, the simulation and experiment research were carried out to identify the new method effectiveness. The results of induction motor control at both steady state and transient state are shown to improve the low-speed performance and strong adaptability of this novel control strategy.

Еще

Matrix converter, DTC, induction motor, Space vector modulation, low-speed performance

Короткий адрес: https://sciup.org/15010135

IDR: 15010135

Список литературы A Novel DTC-SVM Method For Induction Motor Fed By Matrix Converter

  • Guo yougui, Zhu jianlin,“New modulaiton strategy on raising voltage transfer ratio for matrix converter,”control theroy and applications,2006,23(4):542-546.
  • Ding wei, Zhu jianlin, “Matrix congverter and its research situation,” natural science journal of xiangtan university, 2002,24(2):185-187.
  • Lan zhiyong, Zhu jianlin, “Simulation reearch of three phase to three phase sparse matrix converter,” natural science journal of xiangtan university, 2005,27(3):110-115.
  • CASDEI, D; SERRA, G; TANI, A; ZARRI, L. “Matrix Converter Modulation Strategies: A New General Approach on Space-Vector Representation of the Switch State”, IEEE Trans. On Industrial Electronics, Vol. 49,No. 2, April 2002.
  • CASDEI, D; SERRA, G; TANI, A. “The Use of Matrix Converters in Direct Torque Control of Induction Machines”, IEEE Trans. On Industrial Electronics, Vol. 48, No. 6, December 2001.
  • Romeo Ortega, Nikita Barabanov & Gerardo Escobar Valderrama, “Direct Torque Control of Induction Motors: Stability Analysis and Performance Improvement”, IEEE transactions on automatic control, Vol. 46, No. 8, August 2001.
  • TAKAHASHI, I; NOGUSHI, T. “A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor”, IEEE Trans. Industry Applications, Vol. 1A-22, pp 820-827, October 1986.
  • DEPENBROCK, M. “Direct Self-Control (DSC) of Inverter-Fed Induction Machine”, IEEE Trans. on Power Electronics, Vol. 3, No 4, pp 420-429, October 1988.
  • LEE K B, BLAABGERG F, “improved direct torque control for sensorless matrix converter drives with constant switching frequency and torque ripple reduction”, international journal of control, automation and system, 2006,4(1):113-123.
  • C. Lascu, I. Boldea, and F. Blaabjerg, “Very-low-speed variable-structure control of sensorless induction machine drives without signal injection,” IEEE Trans. Ind. Appl., vol. 41, no. 2, pp.591-598, Mar./Apr. 2005.
  • C. Lascu, I. Boldea, and F. Blaabjerg, “Direct torque control of sensorless induction motor drives: a sliding-mode approach,” IEEE Trans. Ind. Appl., vol. 40, no.2, pp.582-590, Mar/Apr. 2004
  • Z. Xu and M. F. Rahman, “Direct torque and flux regulation of an IPM synchronous motor drive using variable structure control approach,” IEEE Trans. Power Electron., vol.22, no. 6, pp.2487-2498, Nov. 2007.
  • V. I. Utkin, “Sliding mode control design principles and applications to electric drives,” IEEE Trans. Ind.Electron., vol.40, no. 1, pp.23-36, Feb. 2003.
  • C. Lascu and A. M. Traynadlowski, “Combining the principles of sliding mode, direct torque control, and space vector modulation in a high-performance sensorless AC drive,” IEEE Trans. Ind. Appl., vol.40, no. 1, pp. 170-177, Jan./Feb. 2004.
  • A. Naassani, E. Monmasson, and J. P. Louis, “Synthesis of direct torque and rotor flux control algorithms by means of sliding-mode theory,” IEEE Trans. Ind.Electron., vol.52, no.3, pp. 785-799, June. 2005.
Еще
Статья научная